Light Up Gardens Instantly! 140-LED Motion Sensor Solar Wall Lamp
Light Up Gardens Instantly! 140-LED Motion Sensor Solar Wall Lamp
| Minimum quantity | Discount |
|---|
Couldn't load pickup availability
Light Up Your Outdoor Space.
Automatically, After Dark.
Illuminate pathways, gardens, patios, driveways and exterior walls with a solar-powered 140-LED lamp. Its wide-angle motion sensor automatically activates in darkness, while the IP65 waterproof housing and no-wiring installation make everyday outdoor lighting simpler.




DARK PATHWAYS? NO OUTDOOR SOCKET? LIGHTS LEFT RUNNING?
Unlit garden entrances and driveways can be inconvenient after sunset. This solar-powered lamp charges during the day and lights up automatically when its sensor detects movement in darkness—without electrical wiring.
140 ULTRA-BRIGHT LED LIGHTS
Bring strong, wide-area illumination to your garden, patio, yard, driveway, fence or exterior wall. The array of 140 bright LEDs provides substantially more light points than basic 20-LED designs, helping illuminate outdoor paths and entrances after dark.

SOLAR COLLECTOR WITH LITHIUM-ION BATTERY
Charge the built-in lithium-ion battery with energy from the sun—no mains power connection required. The solar collector is designed for energy-saving, environmentally friendly outdoor lighting, with a listed battery rating of 1200mA.

120° MOTION DETECTOR
A wide 120° motion sensor detects movement from approximately 3 to 10 metres away, providing a stated lighting coverage of 20–35 m². At night or in darkness, movement switches the lamp on automatically, with the light turning off after about 30 seconds.

EASY, WIRE-FREE INSTALLATION
No electrical wiring or trailing cables are needed. Mount the lamp where it receives direct sunlight during the day—such as a suitable stucco, timber, siding or stone wall—and enjoy convenient automatic outdoor lighting at night. A mounting bracket is included.

IP65 WATERPROOF, ALL-SEASON CONSTRUCTION
Built with a tough ABS plastic housing and an IP65 weatherproof design, this solar wall light is made to withstand rain, snow and challenging outdoor conditions. Keep your garden paths, fence lines and entrances illuminated across the seasons.

POSITION FOR SUNLIGHT: Choose a mounting point that receives direct sunlight during the day, so the solar collector can charge effectively. Check that the wall material is suitable for the mounting bracket.
MOUNT THE LIGHT: Install the wall lamp with its included mounting bracket and suitable fasteners. No mains wiring is needed. Make sure the solar panel is not shaded by trees, eaves or other obstacles.
TURN THE LAMP ON: Before first use, press the switch (the black button mentioned in the original instructions) to enable the lamp and allow sufficient charging time.
LET THE SENSOR WORK: In darkness, the 120° detector turns the lamp on when motion is detected within the stated range of 3–10 m; the light switches off after approximately 30 seconds as described.
KEEP THE PANEL CLEAR: Wipe dust, fallen leaves or snow from the solar panel to maintain charging performance. Cloudy weather can result in a less-than-full charge and affect brightness or lighting duration.
CARE & STORAGE: Switch off the light if it will not be used for an extended period. Actual appearance can vary with lighting or monitor settings, and measurements may vary slightly because they are taken manually.
☀️ SOLAR LIGHTING THAT WORKS FOR YOU
A built-in solar collector and lithium-ion battery help power outdoor lighting without running a cable to the wall.
The motion detector is specified to respond at 3–10 m and illuminate approximately 20–35 m² after dark.
The ABS construction and IP65 waterproof rating make this wall light practical for gardens, patios, paths and exterior walls.
| Product type | Solar Motion Sensor Wall Lamp |
| LED quantity | 140 LEDs |
| Colour | Black |
| Dimensions | 12.4 × 9.5 × 4.7 cm |
| Weight | 180 g |
| Housing material | ABS plastic |
| Power source | Solar energy |
| Battery | Lithium-ion; listed rating 1200mA |
| Motion sensor angle | 120° |
| Motion detection distance | 3–10 m |
| Stated illumination area | 20–35 m² |
| Automatic shut-off | Approximately 30 seconds after activation, as described |
| Weather protection | IP65 waterproof |
| Mounting | Wall-mounted; no electrical wiring required |
📦 1 × Solar Motion Sensor Wall Lamp
🔧 1 × Mounting Bracket
🛡️ 30-Day No-Questions-Asked Refund
Shop with confidence. If you're not satisfied, request a refund within 30 days, subject to your store's applicable refund policy.
Shipping
Shipping
The time frame for delivery of the order is divided into two parts:
Processing time: 1-3 days
Shipping time: 3-5 days
Shipping costs: Free shipping for orders over £13
Shipping methods: 4PX, YunExpress, Wanb Express, UBI
Due to Covid-19, there will be some delays in delivery.
Contact us
Contact us
Customer Service Hours:Monday through Friday 9:00 a.m. to 5:00 p.m. EST
Saturday 10:00 a.m. to 6:00 p.m. EST
Sunday closed.
Email:service@charnent.com