For Small Non-Structural Automotive Sealing Jobs

Surface Preparation Makes A Difference

1. Locate The Actual Gap

Identify the specific seam or opening allowing moisture through before applying sealant.

2. Clean & Dry The Surface

Remove dirt, oil, wax, loose old sealant and moisture so the new material can contact the surface properly.

3. Apply A Continuous Bead

Apply enough material to bridge the gap without excessively spreading it onto surrounding painted or finished areas.

4. Allow Full Cure Before Exposure

Do not expose the repair to water, washing or significant movement until the sealant has cured according to its product instructions.

Specifications

Automotive Sealant

1 × High-Temperature Automotive Adhesive Sealant

• Clean and completely dry the surface before application.
• Remove loose, cracked or poorly bonded old sealant before applying a new bead.
• Test on a small inconspicuous area first if paint, plastic, rubber or trim compatibility is uncertain.
• Do not use this product as a structural adhesive or for safety-critical vehicle repairs.
• Do not use it to repair damaged windshields, structural glass bonding, brake components, fuel systems or other safety-critical assemblies.
• If a leak is caused by damaged weatherstripping, cracked glass, corrosion or a failed bonded component, repair the underlying problem rather than relying only on surface sealant.
• Allow the sealant to cure fully before exposing the area to rain, washing or regular movement.
• Use in a well-ventilated area and avoid contact with eyes and prolonged skin contact.
• Keep away from children, pets, open flames and excessive heat during storage and application.
• Seal the container securely after use and store according to the product packaging instructions.
• Actual product color may vary slightly because of photography, lighting and display settings.

Beware of Counterfeit & Imitation Products

Please purchase only from the official Charnent @ store.

Unauthorized sellers may use similar product images or descriptions while supplying products that differ in silicone consistency, adhesion, flexibility, capacity, packaging or after-sales support.