Wood Care For Home, Garden & Outdoor Spaces

Prepare The Surface Before Applying

1. Clean The Surface

Remove dust, loose dirt, grease, flaking finishes and other contamination that could prevent even absorption.

2. Allow The Wood To Dry

Apply only to a dry surface. Trapped moisture can affect penetration, appearance and drying performance.

3. Patch-Test First

Apply a small amount to an inconspicuous area and allow it to dry so you can check color, sheen and compatibility before treating the entire surface.

4. Apply A Thin, Even Coat

Spread the product evenly with the supplied brush, following the wood grain where practical and avoiding excessive pooling.

5. Allow To Dry Before Use

Allow the treated surface to dry and cure according to the product instructions before exposing it to rain, snow, heavy handling or foot traffic.

A Little Preparation Helps Improve The Result

Specifications

Wood Care Set

1 × Outdoor Wood Wax Oil

1 × Application Brush

• Always patch-test on a small inconspicuous area before treating the entire surface, especially on stained, painted, sealed or unfamiliar materials.
• Apply only to clean, dry and structurally sound surfaces.
• Do not apply over dirt, grease, loose coatings, active mold, rot or severely deteriorated wood without addressing the underlying condition first.
• This treatment may help reduce moisture exposure and surface drying, but it does not repair rotten, cracked or structurally damaged wood.
• The original source states long-lasting protection, but actual service life varies significantly with weather, wood species, preparation, coating thickness, UV exposure and wear. Reapply when the surface shows reduced protection or dryness.
• The source lists beeswax and several plant oils. Avoid assuming the product is suitable for food-contact surfaces unless the packaging specifically confirms that use.
• Keep children and pets away from the product and freshly treated surfaces until fully dry. Do not rely on general “non-toxic” or “eco-friendly” wording as a substitute for the product label's safety instructions.
• Use in a well-ventilated area and avoid contact with eyes and prolonged skin contact.
• Keep away from heat and ignition sources during application and storage unless the manufacturer's packaging explicitly states otherwise.
• Oily applicator cloths can present a fire risk with some drying oils. If cloths are used, handle and dispose of them according to the product label and local safety guidance rather than leaving them crumpled together.
• Allow the finish to dry fully before exposing treated surfaces to rain, snow, heavy use or foot traffic.
• Store tightly closed in a cool, dry place away from direct sunlight.
• Allow slight measurement variation due to manual measurement.
• Actual product and finish color may vary slightly because of wood tone, lighting, photography and display settings.

Beware of Counterfeit & Imitation Products

Please purchase only from the official Charnent @ store.

Unauthorized sellers may use similar product images or descriptions while supplying products that differ in formulation, wax-and-oil content, capacity, finish, brush quality, packaging or after-sales support.